Welcome to the Maker Lab Camino Training!

Here you will find resources for Maker Lab training. The Maker Lab has 3 main categories of equipment: Basic Tools, Power Tools, and Specialty Tools. All users must complete at least Basic Training in order to use the Maker Lab.

Each training has its own Module for you to complete that you can find by navigating to the Modules section. Each training module consists of:

Training packet for you to read
Video(s) for you to watch
Quiz
In-Person Demonstration Assignment (equipment dependent)
Additional resources (equipment dependent)
FAQ discussion

Important Note: In order to schedule an in-person demonstration (via the 'Schedule an Appointment' section), complete and review ALL the sections within the training module, including the Quiz. For example, for the In-person tour for Basic Training, complete the Basic Training module content beforehand.

After completing the Basic Training Module, you can then pick and choose additional equipment training modules based on your need. You can find our full list of equipment on our Tools and Equipment page on the Maker Lab website.

The Maker Lab also offers Lithium Polymer (LiPo) Battery Training, which is required for any University project working with LiPo batteries. Please complete our Lithium Polymer Battery Training Module as needed. Basic Training is not required in order to complete LiPo Battery Training.

Maker Lab Open Hours

The Maker Lab is open during Fall 2024! We might be closed on certain days or in certain weeks, please always refer to our Google Calendar for more detailed information.

Monday	9 am - 5 pm
Tuesday	11 am - 7 pm (5-7pm Guest Open Hours*)
Wednesday	11 am - 7 pm (5-7pm Guest Open Hours*)
Thursday	11 am - 7 pm (5-7pm Guest Open Hours*)
Friday	9 am - 5 pm
Saturday	1 pm - 5 pm (1-5pm Guest Open Hours*)
Sunday	Closed

*Guest Open Hours are special times during which qualified guests can access to the Maker Lab through our Guest Membership Program. All regular Maker Lab users are still welcome to use the lab during Guest Open Hours, though there may be limited equipment availability.

Check out the below Calendar to learn about all of the events going on within the Maker Lab.

Schedule an Appointment for Basic/Laser Cutter/FFF 3D Printer Training

Click here to schedule in-person training

Once you click on the above link, you will open the Maker Lab Training Appointments page. To schedule an appointment:

Click on the training of interest. Choose an available time slot and fill in your contact information. This will book you for a particular appointment slot for a training session. A maximum of 6 slots are offered per training session (8 for Basic Training).
Please note that you must book any training sessions at least 2 hrs in advance; otherwise, the training session will become unavailable.
If no appointment slots are reserved 2 hrs before the time of training, the training session will be canceled.
You can reschedule or cancel an appointment through the options provided on the appointment confirmation email from cal.com.

If you want to schedule an in-person demonstration but none of the training slots work with your schedule or you want to schedule in-person training for other equipment, contact us at makerlab@scu.edu.

For Power Tools or other Specialty tool training not featured on the appointment registration, you may also directly contact:

Demi (dkunlekunbi@scu.edu) for: Carvey, OtherMill, Miter Saw, Band Saw, and ShopBot training
Caleb (csparks@scu.edu) for: Miter Saw, Band Saw, and ShopBot training
Jiayi (jwang21@scu.edu) for: Soldering Iron, Glowforge, SLA 3D Printer, SLS 3D Printer, WAZER Waterjet training

First experience with the new Maker Lab?

Here are the steps you should follow in order to step foot inside the lab and start working on awesome projects:

Review all content on the Home page of this site.
Click on the 'Modules' page. Complete and review all the sections under the Basic Training module, including the Basic Training Quiz.
In order to complete Basic Training, schedule an in-person demonstration and tour with the Maker Lab. Navigate to the above section, "Reserve an Appointment Slot," and click on the link. Select a time that works for you, and register to reserve your space in that appointment slot.
Arrive on time for the in-person demonstration and tour. More information about the lab, layout, and procedures will be provided.

We look forward to seeing you!

Maker Store

If you have projects you want to work on in the Maker Lab but don't have access to get to local stores to purchase materials, you may purchase them from our Maker Store in the Maker Lab. The Maker Store carries:

Materials & Supplies		Price	Note
FFF 3D Printing	eSUN PLA+ Filament 1.75mm	¢2.75/g	For personal print over 100g
	eSUN PETG Filament 1.75mm	¢2.50/g	For personal print over 100g
	eSUN ASA Filament 1.75mm	¢3.00/g	For personal print over 100g
	Quantum Dual-Color PLA Filament 1.75mm	¢7.50/g	For personal print over 50g
	Ultimaker PLA Filament 2.85mm	¢7.25/g	For personal print over 50g
	Ultimaker PETG Filament 2.85mm	¢7.25/g	For personal print over 50g
	Ultimaker Nylon Filament 2.85mm	¢10.25/g	For personal print over 40g
	Ultimaker PVA Filament 2.85mm	¢14.50/g	For personal print over 25g
SLA 3D Printing	Formlabs Standard Resin	¢20.00/ml
SLS 3D Printing	Formlabs Nylon 12 Powder	¢14.00/g
Laser Cutting	1/8" Birch Wood 12" x 24"	$7.25/sheet
	1/4" Birch Wood 12" x 24"	$9.00/sheet
	1/8" Clear Acrylic 12" x 24"	$13.75/sheet
	1/4" Clear Acrylic 12" x 24"	$21.00/sheet
	1/8" Color Acrylic 12" x 12"	$5.50/sheet
Others	Heat Transfer Vinyl 10" x 12"	$0.60/sheet	For Heat Press
	T-shirt (Black or White)	$3.00/pc	For Heat Press
	Bike Repair Patch Kit (6 pack)	$6.00/kit
	FR-1 Board 4" x 5" Single-sided	$2.25/pc	For OtherMill
	FR-1 Board 4" x 5" Double-sided	$2.50/pc	For OtherMill
Poster Printing (complete form to request printing)	44" Poster Paper	$5.00/ft	For Epson SureColor P8000
	44" Singleweight Matte Paper	$5.00/ft	For Epson SureColor P8000
	44" Doubleweight Matte Paper	$5.50/ft	For Epson SureColor P8000
	44" Glossy Paper	$6.50/ft	For Epson SureColor P8000
	30" Plain Paper	$3.50/ft	For Epson SureColor P8000
	24" Plain Paper	$3.00/ft	For Epson SureColor T3170
	24" Poster Paper	$3.00/ft	For Epson SureColor T3170
	24" Singleweight Matte Paper	$3.00/ft	For Epson SureColor T3170
	24" Doubleweight Matte Paper	$3.50/ft	For Epson SureColor T3170
	24" Glossy Paper	$4.00/ft	For Epson SureColor T3170
	24" x 30" Enhanced Matte Posterboard	$15/board	For Epson SureColor P8000
	30" x 40" Enhanced Matte Posterboard	$30/board	For Epson SureColor P8000

Availability of materials is not guaranteed. Items must be paid for via SCU ACCESS card. All transactions must take place in the Maker Lab with assistance from the Maker Lab Supervisor. Prices may change depending on the material supplier costs, but we will always post the most up-to-date prices. For any questions, please contact makerlab@scu.edu.

Meet our Maker Lab Community:

Maker Lab TAs supervise Open Hours and can oversee the In-Person Demonstrations for training.

Maker Lab Coaches assist fellow Makers with questions regarding Maker Lab equipment during Open Hours.

All of the Maker Lab TAs are certified in Basic Tools, Laser Cutter, and FFF 3D Printer. This table lists which ML community members are also certified in Power Tools and Specialty Tools. Even if you have completed training, the Maker Lab TA also has to be certified on that equipment in order for you to use it during their hours.

Maker Lab Community Members and tools they are trained to use.
ML Community Member	ROLE	FFF 3D PRINTER	LASER CUTTER	DRILL PRESS	POWER TOOLS	MITER SAW	BAND SAW	OTHERMILL	SHOPBOT	CARVEY
Demilade Kunle-Kunbi	Maker Lab TA	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Caleb Sparks	Maker Lab TA	Yes	Yes	Yes	Yes	Yes	Yes	No	Yes	No
Alex Torres	Maker Lab TA	Yes	Yes	No	No	No	No	No	No	No
Kira Hofelmann	Maker Lab TA	Yes	Yes	No	No	No	No	No	No	No
Jack Ninteman	Maker Lab TA	Yes	Yes	Yes	Yes	Yes	Yes	No	No	No
Steven Reimer	Maker Lab TA	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Jenny Huynh	Maker Club Officer/ML Coach	Yes	Yes	No	No	No	No	No	No	No
Jo Espiritu	Maker Club Officer/ML Coach	Yes	Yes	No	No	No	No	No	No	No
Dr. JAK	ENGR Professor	Yes	Yes	No	No	No	No	No	No	No
Dr. Patti Simone	Psychology Professor	Yes	Yes	No	No	No	No	No	No	No
Dr. Andy Wolfe	ECEN Professor	Yes	Yes	Yes	Yes	Yes	Yes	No	Yes	No
Aly Khater	ML Coach	Yes	Yes	No	No	No	No	No	No	No
Brayden Ristow	ML Coach	Yes	Yes	No	No	No	No	No	No	No

Project Tutorials:

There is so much you can make in the Maker Lab. If you need help getting started with ideas of what you can make or want to learn more about using the equipment, check out some of our Project Tutorials.

FAQ:

How do I share my amazing suggestions and feedback that could improve the Maker Lab?

Click here to share your idea!

Who do I contact if I have any questions about the Maker Lab training?

If you are an SCU student/staff/faculty and have any questions about the training materials and process, contact us at makerlab@scu.edu

If you want to schedule an in-person demonstration but none of the training slots work with your schedule, also contact us at makerlab@scu.edu. The best way to schedule a special training session with us is to find 2-5 other classmates/peers/friends who would also like to get trained, and request a particular day/time.

Who do I contact if I am SCU Faculty/Staff and want to use the Maker Lab for training or class purposes?

Contact Christopher Kitts at ckitts@scu.edu

For additional resources:

Maker Lab Website: scu.edu/engineering/makerlab (Links to an external site.)

Maker Lab Instagram: @scumakerlab

Link to join this Camino Maker Lab course: https://camino.instructure.com/enroll/YMDMNW